Contents
- 1 What is a good record player to start with?
- 2 How do I connect my hifi to my turntable?
- 3 How do you use a turntable for the first time?
- 4 Will a cheap record player damage records?
- 5 Do record players sound better?
- 6 What setting should my record player be on?
- 7 What speed should I set my record player?
- 8 Can I plug a turntable into Aux?
- 9 How do I know if my record player has a preamp?
- 10 Can I play my record player through my TV?
- 11 Is vinyl a waste of money?
- 12 Can you skip songs on vinyl?
- 13 How do I get started with vinyl?
What is a good record player to start with?
What’s the best record player?
- Pro-Ject Debut Carbon Evo. The best turntable you can buy today.
- Audio-Technica AT-LP120XBT-USB. The best starter turntable with all the features you’ll ever need.
- Fluance RT81.
- Denon DP-300F.
- Audio-Technica AT-LP60XBT.
- Pro-Ject Debut Carbon.
- Rega Planar 1.
- Marantz TT-15S1.
How do I connect my hifi to my turntable?
To connect a turntable without a built-in preamp to a mini Hi-Fi system, you will need to use a standalone preamp between the turntable and the mini Hi-Fi system. You connect the RCA cable from the turntable to the input on the preamp. And the output on the preamp to the LINE input on the mini Hi-Fi system.
How do you use a turntable for the first time?
You should turn your turntable on when you begin a listening session, and only turn it off when you’ve finished listening. You don’t need to turn your turntable off every time you change the record, as this can wear out the motor and belt. This is because the motor is working its hardest when it starts up and engages.
Will a cheap record player damage records?
The short answer is, yes they can. Some cheaper turntables feature a low-quality stylus that might last only 40 playing hours and can start damaging your records.
Do record players sound better?
Vinyl sounds better than MP3s ever could. Most of the music is broadcast in some lossy format, where details are missed, and the overall quality is reduced. No audio data is lost when pressing a record. It sounds just as great as the producer or band intended.
What setting should my record player be on?
Simply switch the turntable back on, place your record onto the platter and select the correct speed setting – there should be a button on the plinth that allows you to do this. If you’re playing a 12-inch you should select 33 RPM (revolutions per minute). For 7-inch vinyls, select 45 RPM.
What speed should I set my record player?
Vinyl is pressed in one of 3 speeds: 33 1/3 Rotations Per Minute (RPM), 45 RPM, and 78 RPMs. The majority of 12-inch long play (LPs) are 33 1/3 RPMs, and most 7-inch extended play (EPs) or singles are 45 RPMs.
Can I plug a turntable into Aux?
This turntable has a built-in phono preamp. Simply plug the turntable’s audio signal cable into one of the receiver’s analog audio inputs. These inputs are oftentimes labeled Aux (auxiliary), Line In, Analog In, etc. You can even use your receiver’s “CD” or “Tape” input, if needed.
How do I know if my record player has a preamp?
If you have a vintage amp or receiver that was produced before 1980, then it’s likely it has a built-in preamp. If you’re not sure, look on the back of the device. You should see a label that says phono, with a ground screw right next to it. If you do, it has a preamp.
Can I play my record player through my TV?
You can connect powered speakers to the turntable. You can try to connect it to your TV using the audio connection of an unused input. The TV may not work without video as well so you could use the video out of another device into the corresponding video connection for the same input.
Is vinyl a waste of money?
If you want to listen to music on vinyl and you like the experience, that sums it up – you’ll buy it and it is not a waste of money because you are spending money on something you want to do.
Can you skip songs on vinyl?
A very common question that comes up frequently is this one: “Can I skip tracks on vinyl?” The plain and simple answer to that is: Yes. You can skip tracks on vinyl records. Anyone can do it.
How do I get started with vinyl?
5 Things You Need to Get Started with Vinyl Today
- A Good Turntable. Firstly, and obviously, you’re going to need a great turntable.
- A Good Preamp. To complement your shiny new turntable, you’ll also want to invest in a good quality preamp.
- Speakers.
- A Carbon Fiber Brush.
- A Basic Cleaning Kit.
- Great Sounding Records.