What are the standard professional tape speeds?

Reel to reel tape runs at 7.5 i/s (or 19 cm/s) and 15 i/s (38 cm/s)- the latter being the professional standard. Occasionally one may find analogue machines set to run at 30 i/s (76 cm/s).” Analog tape systems run at a variety of speeds depending on type.

What is tape speed?

The speed with which recording tape is moving past the tape machine heads, usually measured in inches per second (ips). Tape speed affects the frequency response, noise level, and general performance of the tape while recording and playing back, as well as the amount of recording time available on a given reel of tape.

How long is a 60 minute cassette?

So a standard 60 minute tape can contain up to 30 minutes of recorded material on each side. Prepare your audio tracks so that side A and side B are approximately equal in length so there is not too much silence on either side. The current maximum length that can be produced is 64 minutes total.

How many IPS does a cassette run?

IPS is normally used to describe tape speed in tape recording machines. A typical cassette recorder operates at 1 7/8 IPS, where reel to reel machines can range from 1/ 7/8 all the way up to 30 IPS. Faster speeds will sound better (all other things being equal) and have less noise, but can get expensive.

Does anyone make new reel to tape recorders?

Ballfinger is releasing new models of its reel-to-reel tape decks, which will go on sale later in May, as reported by Bloomberg. Ballfinger says its tape decks are designed for professional use and made of high-strength aluminum. Ballfinger had previously shown one of its tape deck machines last year at an audio show.

What is long play tape?

Long play, double play, triple play The first commonly available increase in tape length resulted from a reduction in thickness from 42 µm to 35 µm, which allowed 3600′, 1800′ and 900′ tapes to fit on ten-and-a-half, seven-, and five -inch reels respectively. These were known as long play tapes.

How long is a 90 minute cassette tape?

Usually a C-90 was 92 minutes long. Meaning 46 minutes a side. The extra margin was for off speed cassette machines.

What is the size of a cassette tape?

Cassette dimensions are approximately 4″ × 2½” × ½”. The track configuration is often four-track stereo, where tracks 1 and 2 compose “Side A” and tracks 3 and 4 compose “Side B.” Some home-recording enthusiasts may use a four-track recorder to create multi-track recordings.

How long do cassette tapes last?

In perfect circumstances, cassette tapes will only last about 30 years if properly stored away from heat, humidity, and UV rays. Whereas a CD stored in the same conditions can last over 100 years. Two common factors for cassette tape deterioration are heat and tape recorder malfunctions.

What is the longest cassette tape?

Sony has just unveiled a new recording tape that can hold 148 GB per square inch. Doing the math, that’s 185 terabytes. This is a vast improvement on the last iteration of this technology which could hold a mere 29.5 GB per square inch.

How does tape cassette work?

How does cassette tape work? Cassette tape is coated with magnetic particles, either iron oxide or chromium oxide. Each magnetic head realigns the magnetic particles on the passing tape in patterns that correspond to the loudness and frequency (rate of vibration) of the incoming sounds.

Who made the best reel to reel tape recorder?

Top 10 Tape Recorder Brands – Past & Present

• REVOX classics – since 1951.
• Stellavox – since 1955.
• Tandberg – Museum of Magnetic Sound Recording.
• Teac | Tascam – Museum of Magnetic Sound Recording.
• Technics – Museum of Magnetic Sound Recording.
• Uher – Museum of Magnetic Sound Recording.
• Wollensak – (1899-1972).