Contents
How do I remove the platter from my BSR record player?
Re: BSR removing the plater First, pull the spindle straight up and out. Then remove the circular clip that holds the platter on. Then you can stick a hot soldering iron into the hole where the spindle came out of. It will soften the old grease to the point where the platter will easily pull off.
How do you remove a Victrola platter?
Simply remove the soundbox from the tonearm by twisting it counterclockwise 1/8 turn and pulling it off. Sometimes they stick a bit and might require some encouragement. Then release the brake so that the turntable spins freely. Remove the turntable platter by pulling it straight up and off the spindle.
Are BSR turntables good?
Once they are properly cleaned and serviced, they usually perform as good as they ever did. Most BSR’s were noisy, had excessive rumble, had heavy tracking tonearms that will cause excessive record wear, and often ran slightly fast. They’re fine for cheaper systems; but, I would not suggest a BSR for serious listening.
How do I uninstall dual 1229 platter?
Re: Dual 1229 Turntable – How do I remove platter? You can put a very small screwdriver in the split part of the ring and then twist it which would spread it apart and then you push slightly and the ring comes off and usually flies across the room.
How do you date a Victrola?
You may find a paper license sticker located on the back, the bottom or on an inside wall or underneath your Victor or Victrola photograph, depending on model (picture on right). This sticker has a veritable plethora of patent and copyright dates printed all over it.